Tractor Pto Gearbox with Different Model
As one of leading shaft clamp manufacturers, suppliers and exporters of mechanical products, We offer shaft clamp and many other products.
Please contact us for details.
Manufacturer supplier exporter of shaft clamp
|MODEL||INPUT DATA||OUTPUT DATA|
Industry-standard mounting dimensions
Thread-in mounting style
Four gear ratios available (5:1, 10:1, 15:1, 25:1)
Mounting hardware is roofed for attaching to SureServo motors
Right-angle reducer utilizes a spiral bevel gear; motor could be located at a 90 deg. position from the reducer, providing a more compact footprint
Helical-cut planetary gears for calm procedure and reduced vibration
Uncaged needle roller bearings for high rigidity and torque
Adapter bushing connection for basic and effective attachment to many servo motors
High-viscosity, anti-separation grease will not migrate from the gears; no leakage through the seal
Maintenance free: you don’t need to replace the grease for the life of the unit
At nominal speed, service life is definitely 20,000 hours
Can be positioned in any orientation
The gearbox is the principal mechanical component of the kinematic chain of agricultural machines. It is normally pushed by the tractor electrical power get-off through the PTO shaft and the gearbox drives. The running torque can also be transmitted to the gearbox by hydraulic motors or belt pulleys, in addition to chain gears.
Gearboxes constantly have 1 enter shaft and at the very least a single output shaft. If these shafts are positioned at 90Â° to every single other, the gearbox is an ORTHOGONAL ANGLE gearbox or a lot more typically called a appropriate-angle gearbox.
Agricultural gearbox te chnical requirements
1. There must be no mechanical damage or casting defects such as cracks and holes in any part of the agricultural gearbox.
2. The surface of the gearbox of the machine tool should be kept clean, and the surface finish of the shaft should not be lower than 76.
3. The ellipticity of each shaft hole of the agricultural machinery gearbox is not greater than 0.015-0.02mm.
4. The irregularity of the center line of each shaft hole is not more than 0.04mm, and the length is 100mm.
5. Wheelbase of agricultural machinery gearbox.
6. The relationship between the bearing hole and the bearing seat of the agricultural gearbox.